{"id":3570,"date":"2025-05-26T12:31:38","date_gmt":"2025-05-26T12:31:38","guid":{"rendered":"https:\/\/www.priorclave.com\/en-us\/?p=3570"},"modified":"2025-05-20T12:40:03","modified_gmt":"2025-05-20T12:40:03","slug":"preventing-media-boil-over-in-your-research-autoclave","status":"publish","type":"post","link":"https:\/\/www.priorclave.com\/en-us\/2025\/05\/26\/preventing-media-boil-over-in-your-research-autoclave\/","title":{"rendered":"Preventing Media Boil-Over in Your Research Autoclave"},"content":{"rendered":"

In many labs, preparing growth media is the autoclave\u2019s primary job. There\u2019s no doubt that steam sterilization is the best approach for this task. Unfortunately, the combination of high temperature and rapid pressure shifts that you see in an autoclave chamber create challenges when preparing or processing liquids\u2014even when the autoclave includes special “liquid cycles.”<\/p>\n

Under the best of circumstances, it\u2019s not unusual to lose 10% to 20% of the liquid from an open container during autoclaving processing. Under less ideal circumstances the chamber pressure drops more quickly than the load can cool. This causes the liquid to violently boil, and can result in a \u201cboil-over\u201d: growth media overflows its container, fouling your autoclave chamber and potentially entering the sterilizers\u2019 plumbing. When it cools, the media can gum up valves and block pipes. Sealing the container that\u2019s holding the liquid media to \u201cprevent spills\u201d is not a good alternative: if the autoclave hasn\u2019t been set up for processing sealed containers, it\u2019s highly likely some may rupture or burst, either during the sterilization process, or when the unit is being unloaded.<\/p>\n

In either case, the sample is wasted, the cycle is ruined, lab techs and researchers are potentially injured, and at the very last everyone is stuck cleaning up a big annoying mess.<\/p>\n

Tips to Prevent Sample Boil-Over<\/h2>\n

Fortunately, there are ways to prevent the frustration and waste of boil-over. Priorclave North America<\/a> offers these four tips to protect the integrity of your samples and prevent messes during media prep:<\/p>\n

Tip #1: Only fill sample containers halfway<\/h3>\n

You should assume liquids will boil up at least 20 percent. Some froth even more. This is especially with LB agar, but other agars, broths, and growth media are not immune. If you do not fill your containers more than 50 percent, you leave plenty of room to boil without boiling over.<\/p>\n

Tip #2: Place your samples in a deep tray<\/h3>\n

Even if you follow all the tips to prevent the likelihood of boil-over, no process is infallible. Sometimes a cycle doesn\u2019t run as planned, and unexpected results happen. Cleaning a tray is relatively easy and far preferable to cleaning the autoclave chamber and plumbing.<\/p>\n

Tip #3: Add at least \u00bc\u201d water to the tray<\/h3>\n

Adding water to the tray buffers the effects of temperature and pressure changes as the chamber heats and cools. Additionally, if the sample does boil over or a bottle cracks, a tray with water will be easier to clean.<\/p>\n

Tip #4: Hope for the best, but plan for the worst<\/h3>\n

Select a tray that is deep enough to contain your water buffer, all liquid samples, and the remnants from burst containers. This will mitigate the effects of a bad cycle, and make your life easier when it\u2019s time to clean up the mess. Again: dumping out a messy tray is much easier and faster than cleaning out an autoclave chamber<\/p>\n

Consider an Air Ballast Option<\/h2>\n

If your lab runs a lot of liquid loads, you might consider choosing an autoclave with an air ballast<\/a>. The air ballast serves two functions: first and foremost, it mitigates rapid chamber depressurization by flooding the chamber with cool, pressurized air as the autoclave vents hot steam. Additionally, the influx of fresh air helps cool the load. Together, these effects help the pressure remain more stable and allows the sample to gradually cool to a safer temperature. That minimizes boiling and loss to evaporation.<\/p>\n

Protect the Integrity of Your Research With Priorclave<\/h2>\n

Priorclave autoclaves are designed for research. All Priorclave autoclaves are built with special attention to liquid loads, nutrient broth, and media preparation. Our chamber and valve design discourage evaporation, bottle ruptures, and excessive boiling. Priorclave\u2019s optional air ballast system provides the benefits of equalized chamber pressure and eases the cooling process, reducing the likelihood of burst bottles and boil-over.<\/p>\n

Have questions or want to discuss your lab\u2019s autoclave needs? Please feel free to reach out<\/a> to us today.<\/p>\n","protected":false},"excerpt":{"rendered":"

In many labs, preparing growth media is the autoclave\u2019s primary job. There\u2019s no doubt that steam sterilization is the best approach for this task. Unfortunately, the combination of high temperature […]<\/p>\n","protected":false},"author":13,"featured_media":3571,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[465],"tags":[],"class_list":["post-3570","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-lab-practices"],"acf":[],"yoast_head":"\nPreventing Media Boil-Over in Your Research Autoclave<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.priorclave.com\/en-us\/2025\/05\/26\/preventing-media-boil-over-in-your-research-autoclave\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Preventing Media Boil-Over in Your Research Autoclave\" \/>\n<meta property=\"og:description\" content=\"In many labs, preparing growth media is the autoclave\u2019s primary job. There\u2019s no doubt that steam sterilization is the best approach for this task. Unfortunately, the combination of high temperature […]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.priorclave.com\/en-us\/2025\/05\/26\/preventing-media-boil-over-in-your-research-autoclave\/\" \/>\n<meta property=\"og:site_name\" content=\"Priorclave - United States\" \/>\n<meta property=\"article:published_time\" content=\"2025-05-26T12:31:38+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.priorclave.com\/en-us\/wp-content\/uploads\/sites\/3\/2025\/05\/PNA-AI-boilover-Generated-Image-May-20-2025-8_29AM-e1747744525607.jpeg\" \/>\n\t<meta property=\"og:image:width\" content=\"500\" \/>\n\t<meta property=\"og:image:height\" content=\"500\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Priorclave North America\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Priorclave North America\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"4 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/2025\\\/05\\\/26\\\/preventing-media-boil-over-in-your-research-autoclave\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/2025\\\/05\\\/26\\\/preventing-media-boil-over-in-your-research-autoclave\\\/\"},\"author\":{\"name\":\"Priorclave North America\",\"@id\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/#\\\/schema\\\/person\\\/8b31c12dd95522a519b919985d6ce760\"},\"headline\":\"Preventing Media Boil-Over in Your Research Autoclave\",\"datePublished\":\"2025-05-26T12:31:38+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/2025\\\/05\\\/26\\\/preventing-media-boil-over-in-your-research-autoclave\\\/\"},\"wordCount\":665,\"commentCount\":0,\"image\":{\"@id\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/2025\\\/05\\\/26\\\/preventing-media-boil-over-in-your-research-autoclave\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/wp-content\\\/uploads\\\/sites\\\/3\\\/2025\\\/05\\\/PNA-AI-boilover-Generated-Image-May-20-2025-8_29AM-e1747744525607.jpeg\",\"articleSection\":[\"Lab Practices\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/2025\\\/05\\\/26\\\/preventing-media-boil-over-in-your-research-autoclave\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/2025\\\/05\\\/26\\\/preventing-media-boil-over-in-your-research-autoclave\\\/\",\"url\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/2025\\\/05\\\/26\\\/preventing-media-boil-over-in-your-research-autoclave\\\/\",\"name\":\"Preventing Media Boil-Over in Your Research Autoclave\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/2025\\\/05\\\/26\\\/preventing-media-boil-over-in-your-research-autoclave\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/2025\\\/05\\\/26\\\/preventing-media-boil-over-in-your-research-autoclave\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/wp-content\\\/uploads\\\/sites\\\/3\\\/2025\\\/05\\\/PNA-AI-boilover-Generated-Image-May-20-2025-8_29AM-e1747744525607.jpeg\",\"datePublished\":\"2025-05-26T12:31:38+00:00\",\"author\":{\"@id\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/#\\\/schema\\\/person\\\/8b31c12dd95522a519b919985d6ce760\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/2025\\\/05\\\/26\\\/preventing-media-boil-over-in-your-research-autoclave\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/2025\\\/05\\\/26\\\/preventing-media-boil-over-in-your-research-autoclave\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/2025\\\/05\\\/26\\\/preventing-media-boil-over-in-your-research-autoclave\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/wp-content\\\/uploads\\\/sites\\\/3\\\/2025\\\/05\\\/PNA-AI-boilover-Generated-Image-May-20-2025-8_29AM-e1747744525607.jpeg\",\"contentUrl\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/wp-content\\\/uploads\\\/sites\\\/3\\\/2025\\\/05\\\/PNA-AI-boilover-Generated-Image-May-20-2025-8_29AM-e1747744525607.jpeg\",\"width\":500,\"height\":500,\"caption\":\"AI generated art of a messy autoclave growth media boilover\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/2025\\\/05\\\/26\\\/preventing-media-boil-over-in-your-research-autoclave\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Preventing Media Boil-Over in Your Research Autoclave\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/#website\",\"url\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/\",\"name\":\"Priorclave - United States\",\"description\":\"\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/#\\\/schema\\\/person\\\/8b31c12dd95522a519b919985d6ce760\",\"name\":\"Priorclave North America\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/ddd164285c295da8fea40f7681fa8d17154184cce1ab962d04b0178d94f9e445?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/ddd164285c295da8fea40f7681fa8d17154184cce1ab962d04b0178d94f9e445?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/ddd164285c295da8fea40f7681fa8d17154184cce1ab962d04b0178d94f9e445?s=96&d=mm&r=g\",\"caption\":\"Priorclave North America\"},\"url\":\"https:\\\/\\\/www.priorclave.com\\\/en-us\\\/author\\\/dnelson\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Preventing Media Boil-Over in Your Research Autoclave","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.priorclave.com\/en-us\/2025\/05\/26\/preventing-media-boil-over-in-your-research-autoclave\/","og_locale":"en_US","og_type":"article","og_title":"Preventing Media Boil-Over in Your Research Autoclave","og_description":"In many labs, preparing growth media is the autoclave\u2019s primary job. There\u2019s no doubt that steam sterilization is the best approach for this task. Unfortunately, the combination of high temperature […]","og_url":"https:\/\/www.priorclave.com\/en-us\/2025\/05\/26\/preventing-media-boil-over-in-your-research-autoclave\/","og_site_name":"Priorclave - United States","article_published_time":"2025-05-26T12:31:38+00:00","og_image":[{"width":500,"height":500,"url":"https:\/\/www.priorclave.com\/en-us\/wp-content\/uploads\/sites\/3\/2025\/05\/PNA-AI-boilover-Generated-Image-May-20-2025-8_29AM-e1747744525607.jpeg","type":"image\/jpeg"}],"author":"Priorclave North America","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Priorclave North America","Est. reading time":"4 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.priorclave.com\/en-us\/2025\/05\/26\/preventing-media-boil-over-in-your-research-autoclave\/#article","isPartOf":{"@id":"https:\/\/www.priorclave.com\/en-us\/2025\/05\/26\/preventing-media-boil-over-in-your-research-autoclave\/"},"author":{"name":"Priorclave North America","@id":"https:\/\/www.priorclave.com\/en-us\/#\/schema\/person\/8b31c12dd95522a519b919985d6ce760"},"headline":"Preventing Media Boil-Over in Your Research Autoclave","datePublished":"2025-05-26T12:31:38+00:00","mainEntityOfPage":{"@id":"https:\/\/www.priorclave.com\/en-us\/2025\/05\/26\/preventing-media-boil-over-in-your-research-autoclave\/"},"wordCount":665,"commentCount":0,"image":{"@id":"https:\/\/www.priorclave.com\/en-us\/2025\/05\/26\/preventing-media-boil-over-in-your-research-autoclave\/#primaryimage"},"thumbnailUrl":"https:\/\/www.priorclave.com\/en-us\/wp-content\/uploads\/sites\/3\/2025\/05\/PNA-AI-boilover-Generated-Image-May-20-2025-8_29AM-e1747744525607.jpeg","articleSection":["Lab Practices"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.priorclave.com\/en-us\/2025\/05\/26\/preventing-media-boil-over-in-your-research-autoclave\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.priorclave.com\/en-us\/2025\/05\/26\/preventing-media-boil-over-in-your-research-autoclave\/","url":"https:\/\/www.priorclave.com\/en-us\/2025\/05\/26\/preventing-media-boil-over-in-your-research-autoclave\/","name":"Preventing Media Boil-Over in Your Research Autoclave","isPartOf":{"@id":"https:\/\/www.priorclave.com\/en-us\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.priorclave.com\/en-us\/2025\/05\/26\/preventing-media-boil-over-in-your-research-autoclave\/#primaryimage"},"image":{"@id":"https:\/\/www.priorclave.com\/en-us\/2025\/05\/26\/preventing-media-boil-over-in-your-research-autoclave\/#primaryimage"},"thumbnailUrl":"https:\/\/www.priorclave.com\/en-us\/wp-content\/uploads\/sites\/3\/2025\/05\/PNA-AI-boilover-Generated-Image-May-20-2025-8_29AM-e1747744525607.jpeg","datePublished":"2025-05-26T12:31:38+00:00","author":{"@id":"https:\/\/www.priorclave.com\/en-us\/#\/schema\/person\/8b31c12dd95522a519b919985d6ce760"},"breadcrumb":{"@id":"https:\/\/www.priorclave.com\/en-us\/2025\/05\/26\/preventing-media-boil-over-in-your-research-autoclave\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.priorclave.com\/en-us\/2025\/05\/26\/preventing-media-boil-over-in-your-research-autoclave\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.priorclave.com\/en-us\/2025\/05\/26\/preventing-media-boil-over-in-your-research-autoclave\/#primaryimage","url":"https:\/\/www.priorclave.com\/en-us\/wp-content\/uploads\/sites\/3\/2025\/05\/PNA-AI-boilover-Generated-Image-May-20-2025-8_29AM-e1747744525607.jpeg","contentUrl":"https:\/\/www.priorclave.com\/en-us\/wp-content\/uploads\/sites\/3\/2025\/05\/PNA-AI-boilover-Generated-Image-May-20-2025-8_29AM-e1747744525607.jpeg","width":500,"height":500,"caption":"AI generated art of a messy autoclave growth media boilover"},{"@type":"BreadcrumbList","@id":"https:\/\/www.priorclave.com\/en-us\/2025\/05\/26\/preventing-media-boil-over-in-your-research-autoclave\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.priorclave.com\/en-us\/"},{"@type":"ListItem","position":2,"name":"Preventing Media Boil-Over in Your Research Autoclave"}]},{"@type":"WebSite","@id":"https:\/\/www.priorclave.com\/en-us\/#website","url":"https:\/\/www.priorclave.com\/en-us\/","name":"Priorclave - United States","description":"","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.priorclave.com\/en-us\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/www.priorclave.com\/en-us\/#\/schema\/person\/8b31c12dd95522a519b919985d6ce760","name":"Priorclave North America","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/ddd164285c295da8fea40f7681fa8d17154184cce1ab962d04b0178d94f9e445?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/ddd164285c295da8fea40f7681fa8d17154184cce1ab962d04b0178d94f9e445?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/ddd164285c295da8fea40f7681fa8d17154184cce1ab962d04b0178d94f9e445?s=96&d=mm&r=g","caption":"Priorclave North America"},"url":"https:\/\/www.priorclave.com\/en-us\/author\/dnelson\/"}]}},"_links":{"self":[{"href":"https:\/\/www.priorclave.com\/en-us\/wp-json\/wp\/v2\/posts\/3570","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.priorclave.com\/en-us\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.priorclave.com\/en-us\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.priorclave.com\/en-us\/wp-json\/wp\/v2\/users\/13"}],"replies":[{"embeddable":true,"href":"https:\/\/www.priorclave.com\/en-us\/wp-json\/wp\/v2\/comments?post=3570"}],"version-history":[{"count":0,"href":"https:\/\/www.priorclave.com\/en-us\/wp-json\/wp\/v2\/posts\/3570\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.priorclave.com\/en-us\/wp-json\/wp\/v2\/media\/3571"}],"wp:attachment":[{"href":"https:\/\/www.priorclave.com\/en-us\/wp-json\/wp\/v2\/media?parent=3570"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.priorclave.com\/en-us\/wp-json\/wp\/v2\/categories?post=3570"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.priorclave.com\/en-us\/wp-json\/wp\/v2\/tags?post=3570"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}